At Pattrick and Thompsons we stock the high-quality Building Materials, including Bricks and Blocks, Cement & Aggregates, Insulation, Plaster & Plasterboard, Lintels, Building Chemicals, Roofing Felt & Membrane, Metalwork, Water & Damp Proofing and Drainage & Ducting. Building Materials are available for delivery or can be collected in our Kings Lynn store. If you still need some assistance, please call store 01553 762026 for advice.
Build with strength and durability using the A142 Reinforcement Mesh. This high-quality steel mesh, measuring 3.6x2.0m, is a reliable choice for reinforcing foundations, slabs, and walls. Get your builder ton of reinforcement and construct with confidence.
Aco RainDrain Corner Unit with glavanised steel grating and vertical outlet - Crafted from recycled materials, this ingeniously designed product allows the seamless connection of up to four channels from any of the four sides. The removable spigot enables direct connection to a 110mm uPVC pipe located underneath.
ACO Hexdrain and Raindrain Outlet End Cap - Featuring a 110mm diameter, this ACO HexDrain and RainDrain Outlet End Cap allows for a seamless horizontal 110mm outlet.
ACO HexDrain Sump Unit Black Plastic 250mm Deep - is suitable for domestic applications up to Load Class A 15 - Pedestrian, cycleways, minimally trafficked areas (light domestic vehicles only). The high quality ACO HexDrain channels clip together, allowing for quick and easy installation.
ACO RainDrain Drainage Channel with Cast Iron Grate is part of the ACO RainDrain family of drainage channels. Manufactured from Vienite polymer concrete, it's suitable for traffic up to B 125 load class. The high quality ACO RainDrain channels interlock, allowing for quick and easy installation
1m Aco RainDrain Polymer Channel - Manufactured from Vienite, ACO's high strength polymer concrete material, ACO RainDrain is suitable for domestic applications up to Load Class A 15. Recommended Applications :Garage Thresholds, Patio and Paths, Pedestrian Precincts
Aco RainDrain Sump Unit Galv Steel Grating is manufactured from polymer concrete giving it a light, strong construction. The unit comes complete with a galvanised A15 rated grating and a sediment bucket.
Black Jack Flashing Tape 10m x 150mm is a strong self-adhesive flashing tape comprising of an aluminium foil and a bitumen rubber adhesive to form a strong waterproof seal.
Black Jack Trade Flashing Tape - 10m 100mm, stands as a robust self-adhesive flashing tape composed of aluminum foil and a bitumen rubber adhesive. By firmly pressing the tape into position manually, the adhesive creates a reliable waterproof seal.
Brett Martin Underground 110mm B1300 Drain Pipe Low Level P Trap Gully - Designed to suit 110mm drainpipes, this Brett Martin Drain Pipe Low-Level P Trapped Gully will help ensure foul odours do not penetrate your underground drainage system and back towards your property. A body of water will sit beneath the gully outlet, forming a barrier against nasty smells.
Thistle Hardwall is a plaster that is used on brick and block work as an undercoat and provides a substantial base in preparation for finishing plaster. It is quick drying and can be applied manually or by machine.
Bulk Bag Grano Dust 0-4mm can be used as a compacted top layer base for use with Artificial Grass and Block Paving, concrete slabs and stone flags.It will compact down to give a smooth finish, ideally laid on top of MOT type 1 as a sub layer for Artificial Grass.
Bulk Bag Sharp Sand is a coarse grit sand that can be used for screeding, rendering, laying patio paving, block paving and is suitable for all general building use.
Cavity Closer SF-MULTI 50-100mm 2.4m Lengths - Prevents cold bridging. Reduces risk of condensation, mould, & moisture migration across the cavity. Insulated Cavity Closer - for use around door and window openings.
Cavity Closer TF-MULTI 100-150mm 2.4m Lengths - Prevents cold bridging. Reduces risk of condensation, mould, & moisture migration across the cavity. Insulated Cavity Closer - for use around door and window openings.
Code 3 Milled Lead Flashing Roll 3m x 240mm is the only lead flashing manufactured to BS EN 12588, the British Standard for lead and lead alloys. Ideal for soakers as the thickness will not affect tile or slate layout. A soaker is installed between tile or slate junctions on a pitched roof to ensure it is weatherproof.
Code 4 Milled Lead 3m x 600mm Roofing Lead Flashing Roll - this Rolled Lead Sheet is suitable for all roofing applications. This includes flat and pitched roofing, flashings, parapets, gutters and all other lead detail work. It is manufactured to BS EN 12588 2006.
Code 4 Milled Lead 6m x 240mm Roofing Lead Flashing Roll- this Rolled Lead Sheet is suitable for all roofing applications. This includes flat and pitched roofing, flashings, parapets, gutters and all other lead detail work. It is manufactured to BS EN 12588 2006.