At Pattrick and Thompsons we stock the high-quality Building Materials, including Bricks and Blocks, Cement & Aggregates, Insulation, Plaster & Plasterboard, Lintels, Building Chemicals, Roofing Felt & Membrane, Metalwork, Water & Damp Proofing and Drainage & Ducting. Building Materials are available for delivery or can be collected in our Kings Lynn store. If you still need some assistance, please call store 01553 762026 for advice.
Standard Plasterboard is a gypsum based plasterboard that is commonly used for partition walls, dry lining and ceilings. Available in various sizes and thicknesses, with a tapered or square edge finish.
Hanson Kiln Dried Sand is a dry, lime-free washed silica sand, which contains approximately 95% silica. The typical grain size is 0.5mm. Specifically produced for brushing in.
Rhino Hi-Tak Orange Scrim Tape 50mm x 90m - Orange high-tack self-adhesive fibreglass reinforced plasterers tape. For covering plasterboard joints prior to texturing and finishing. Ideal when application temperatures are very low or when extra adhesion is required. Repairs cracks & patches holes.
Hyload Original DPC Damp Proof Course 300mm x 20m is a flexible polymeric sheet material. It is used within masonry walls to prevent passage of moisture from the ground. It can also be used at all levels as a cavity tray to prevent the downward movement of water.
Ibstock Anglian Red Rustic Brick 65mm ( 215 x 65 x 102mm) ,a Red Perforated, Rusticated Facing Brick. With a water absorption rate of 13%, these bricks are suitable for seamless brick matching, complemented by a compressive strength of 25N/mm2.
IKO Hyload Insulated Damp Proof Course (DPC) 165mm x 8m is a high performance DPC laminated to flexible foam insulation. Used to minimise the risk of cold bridging in traditional methods of masonry cavity closers.
IKO Hyload Original Damp Proof Course DPC 100mm x 20m system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.
IKO Shed Felt Green Slate 1 x 10m - Economical, bituminous roofing felt with a protective mineral finish, ideal for waterproofing and safeguarding garden buildings like sheds, summerhouses, kennels, and hutches.
Iko Trade Top Sheet Green 1 x 10m - a robust green-surfaced top layer, serves as an excellent choice for a cap sheet in a multi-layer system for garden buildings. Alternatively, it can be used as a single-layer solution for shed roofs (non-habitable buildings)
Imperial Brick 65mm Dual Faced Pre War Common, featuring an appealing orange/red base with pale flashings and dark overburns on the face. This versatile brick is supplied in a unique 3-in-1 dual faced format, offering both clean and weathered faces/headers, perfect for custom on-site blending to suit your specific needs.
Keystone HD/K-90 Heavy Duty Cavity Wall Lintel 1200mm - is a heavy duty load lintel used to support openings with cavity widths of 90-105mm. Blockwork built tight against inner face of the lintel. Place mortar bed on top of blockwork before floor units are laid to provide even distribution of load.
Keystone HD/K-90 Heavy Duty Cavity Wall Lintel 1500mm is a heavy duty load lintel used to support openings with cavity widths of 90-105mm. Blockwork built tight against inner face of the lintel. Place mortar bed on top of blockwork before floor units are laid to provide even distribution of load.
Keystone HD/K-90 Heavy Duty Cavity Wall Lintel 1800mm - is a heavy duty load lintel used to support openings with cavity widths of 90-105mm. Blockwork built tight against inner face of the lintel. Place mortar bed on top of blockwork before floor units are laid to provide even distribution of load.
Keystone HD/K-90 Heavy Duty Cavity Wall Lintel 2100mm is a heavy duty load lintel used to support openings with cavity widths of 90-105mm. Blockwork built tight against inner face of the lintel. Place mortar bed on top of blockwork before floor units are laid to provide even distribution of load.
Keystone HD/K-90 Heavy Duty Cavity Wall Lintel 2400mm - is a heavy duty load lintel used to support openings with cavity widths of 90-105mm. Blockwork built tight against inner face of the lintel. Place mortar bed on top of blockwork before floor units are laid to provide even distribution of load.