Sheet Materials

9mm 2440 x 1220 Sundeala 'K' LightGrey Pinboard BS EN622-3 MBL

MDF (Medium Density Fiberboard) is engineered board produced from resin bonded wood fibers under high pressure and heat. MDF is non-load-bearing product for interior use in dry conditions. Sanded to give a very fine surface, MDF is suitable for different coatings – veneering, laminating, painting and varnishing. MDF can be used as a building material for a substitute for timber in non-load-bearing walls, ceilings, partitions etc.

MDF MR are boards for load-bearing use in dry and humid conditions. MDF MR are manufactured in compliance with EN 622-5 as MDF.HLS type and are defined as structural components for use in humid conditions for instantaneous or short-term periods of load only. Boards are particularly suitable for construction applications that require panels with high load bearing capacity and moisture resistance and for a wide range of interior applications. The product is suitable for further processing and painting.

CaberFix Waterproof Cloth Tape 48mm x 50m Used to maintain the integrity of the surface protection film for laid boards. For sealing panel perimeters to walls and for sealing joints during construction phases.

Egger Joint & Joist D4 PU Adhesive 1kg Bottle - Flooring Adhesive 1kg Tub (1kg does 7 boards) is designed to bond the tongue and groove of the chipboard.

EGGER P5 TG4 Chipboard Flooring (2400 x 600 x 18mm) is an enhanced moisture resistant tongue and groove structural flooring board, EGGER P5 is the backbone of our structural chipboard flooring products. Each board is machine profiled with unique diamond-tipped tooling to achieve a precision tongue and groove for a tighter, more consistent board joint.

EGGER P5 TG4 Chipboard Flooring (2400 x 600 x 22mm) is an enhanced moisture resistant tongue and groove structural flooring board, EGGER P5 is the backbone of our structural chipboard flooring products. Each board is machine profiled with unique diamond-tipped tooling to achieve a precision tongue and groove for a tighter, more consistent board joint.

EGGER Peel Clean Xtra P5 Chipboard Flooring - 2400 x 600 x 18mm particleboard at the core and are covered with an easy-to-peel, anti-slip polyethylene film. The recyclable, peel-away film helps to prevent moisture ingress and provides an additional moisture barrier upon completion of the floor. Once the film has been removed, it leaves a clean floor ready for handover.

EGGER Peel Clean Xtra P5 Chipboard Flooring - 2400 x 600 x 22mm particleboard at the core and are covered with an easy-to-peel, anti-slip polyethylene film. The recyclable, peel-away film helps to prevent moisture ingress and provides an additional moisture barrier upon completion of the floor. Once the film has been removed, it leaves a clean floor ready for handover.

Neatmatch 1220x2440x9mm Primed Short Grain

Neatmatch 1220x3050x9mm G416 MR MDF Primed Cross Grain

Neatmatch 2440x1220x9mm Primed Long Grain

11mm 2440 x 1220 SmartPly OSB 3 Board Conditioned EN300 CE2+FSC is a load-bearing wood-based panel product engineered for structural use in humid environments. It is free from knots and voids, ensuring reliability and durability.

Rainwater-repellent construction plywood with a hydrophobic surface
Metsä Wood Spruce WeatherGuard is a multipurpose construction panel with a hydrophobic surface. The surface repels rainwater and therefore reduces the amount of water absorbed by the panel during construction work. At the same time, the surface allows the panel to breathe, and water vapour to move freely.

MDF (Medium Density Fiberboard) is engineered board produced from resin bonded wood fibers under high pressure and heat. MDF is non-load-bearing product for interior use in dry conditions. Sanded to give a very fine surface, MDF is suitable for different coatings – veneering, laminating, painting and varnishing. MDF can be used as a building material for a substitute for timber in non-load-bearing walls, ceilings, partitions etc.

5.5mm x 2440 x 1220 FSC Eucalyptus Hardwood Faced 100% Poplar Core Plywood Class 3. Typical uses can include, roofing, flooring, furniture, shop fitting and wall sheathing, site hoarding and general construction applications.

9mm 2440 x 1220 Far Eastern Marine Plywood BS1088 EN636-3 - Marine plywood refers to a type of plywood specifically designed and manufactured for marine applications, particularly for use in environments where the wood is exposed to moisture, water, or high humidity levels. This type of plywood is made using high-quality, durable wood veneers bonded together with waterproof adhesives.

12mm 2440 x 1220 Far Eastern Marine Plywood BS1088 EN636-3 - Marine plywood refers to a type of plywood specifically designed and manufactured for marine applications, particularly for use in environments where the wood is exposed to moisture, water, or high humidity levels. This type of plywood is made using high-quality, durable wood veneers bonded together with waterproof adhesives.

15mm 2397 x 1197 SmartPly OSB3 Conditioned EN300 CE2+FSC

Rainwater-repellent construction plywood with a hydrophobic surface
Metsä Wood Spruce WeatherGuard is a multipurpose construction panel with a hydrophobic surface. The surface repels rainwater and therefore reduces the amount of water absorbed by the panel during construction work. At the same time, the surface allows the panel to breathe, and water vapour to move freely.